Easy to use RGB colour mixing Mini Chain LED IP67 using SSI Red, Green and Blue LEDs to mix any colour of your choice using our RGB simple colour controller. This will also vary intensity and perform other colour auto change functions.
Each module pre spaced on at 86mm centre to centre. Total 50 Modules per set. Modification to centres possible by cutting and inserting 4 core wire to form spaces/spacing as required.
Requires Constant Voltage power supply and RGB control. See separate part numbers.
Easy to use with our simple IR Colour controller
Arrives in 4.3m kits with 50 modules per kit
Fitting Advice
Each 4.3M 50 module set draws 14watts. Therefore, if you are running two sets that's 28watts and so on. You must select the power supply to suit i.e. a 25w PSU will not properly run two sets. Upgrade the PSU according to the amount you order. It is also not recommended to run more than three sets in one line. |
